2024 Locomotive 4 8 4

Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. . Sylvia

The B&O bought thirteen 4-8-2s from the Boston & Maine. They were given road numbers 5650 through 5662 and were designated as Class T-4 and were used until 1958. There are no surviving B&O "Mountains". The Class Ts (numbers 5500 & 5501) were scrapped in 1953. Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.Nov 14, 2011 · This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive. Factor of adh. The Norfolk and Western class J was a class of fourteen 4-8-4 "Northern" streamlined steam locomotives built by the Norfolk and Western Railway (N&W) at its Roanoke Shops in Roanoke, Virginia between 1941 and 1950. They performed flawlessly, making them the most powerful 4-8-4 steam locomotives ever produced.The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. The big J3 engine, the sole survivor of a class of 20 built during the desperate days of World War II, is a 1942 product of the American Locomotive Company. The last time someone proposed removing the 4-8-4 from Centennial Park, in 2001, the parks board declined the offer.May 9, 2022 · Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598 Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green ...The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ... Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The Minneapolis, St. Paul & Sault Sainte Marie Railroad purchased four Class O-20, 4-8-4s in 1938 from the Lima Locomotive Works. They were given road numbers 5000 through 5003 and were assigned to both freight and passenger trains. These locomotives were designed with 75" drivers, 26 x 32 cylinders, a 270 psi boiler pressure, a weight of ...4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsWorks numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ... Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ... China Railways KF. The Class KF (聯盟型, 'Confederation class', re-designated "ㄎㄈ" or "KF") was a 4-8-4 mainline passenger steam locomotive type built in the United Kingdom by the Vulcan Foundry for the railways of China. Between 1935 and 1936, 24 locomotives were built for the Guangzhou – Hankou Railway designated as the 600 series. [1]A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ...Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive.Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service." Unlike the GS-3, the GS-4 had a dual ...N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ... N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ...O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggestIn 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.In the early 1940s, the Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns. These rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. They had 28 x 30 cylinders, a boiler pressure of 250 psi, a total ...May 9, 2022 · Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598 In the case of a long locomotive like the Big Boy, articulation allowed the engine to operate on tracks with curves as sharp as 20 degrees. ALCO built the Big Boys in Schenectady, New York, and two versions of the engine were made. Starting in 1941, 20 of the 4-8-8-4-1 class engines were made and numbered 4000–4019.The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive.4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...The Minneapolis, St. Paul & Sault Sainte Marie Railroad purchased four Class O-20, 4-8-4s in 1938 from the Lima Locomotive Works. They were given road numbers 5000 through 5003 and were assigned to both freight and passenger trains. These locomotives were designed with 75" drivers, 26 x 32 cylinders, a 270 psi boiler pressure, a weight of ...The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsUnion Pacific's own team, in conjunction with Alco (both parties had also collaborated on the 4-6-6-4), significantly enlarged the Challenger to create the 4-8-8-4 Big Boy. The locomotive offered a tractive effort of roughly 135,000 pounds (37,650 pounds more than its smaller cousin) with speeds capable of 80 mph.4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... S GAUGE 4-8-4 NORTHERN STEAM LOCOMOTIVE BY LIONEL. Price: $474.99 (no. 48054) Features: Can-style motor, die-cast metal construction, smoke unit, both RailSounds and traditional “choo-choo” chuff sounds. Pros: Captures the toy-like style of the postwar model, runs well. Cons: “Choo-choo” sounds are too high pitched and ruin the effect ...Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn.The Chicago, Milwaukee, St. Paul & Pacific Railroad's own motive power department designed a Class S-1, 4-8-4 in 1930. It was built by the Baldwin Locomotive Works and put on the roster as number 9700. It remained the lone Northern on the CMStP&P for the next seven years.Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History Bachmann Trains Online Store! : 4-8-4 Northern - Gift Shop Catalogs HO Parts Large Scale Parts N Parts On30 Parts General Parts & Supplies O Scale - Williams Track DCC Sound Boards E-Z App boards Locomotive / Tender Speakers All Scale Kit Bashing ecommerce, open source, shop, online shopping, storeSanta Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive. A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ... 4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... Water cap. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960. 4-4-4T Cóndor of the Gran Ferrocarril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ... In the early 1940s, the Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns. These rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. They had 28 x 30 cylinders, a boiler pressure of 250 psi, a total ...4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...May 8, 2023 · The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph! Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ... The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... Ultra-realistic Union Pacific 4-8-8-4 “Big Boy” steam locomotive. Complete and authentic operating controls and characteristics. Optional configurations for all levels of difficulty from manual operations to auto-fireman and auto-engineer assists, the locomotive is also compatible with Simple Controls. Three locomotive livery variations.The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History

October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ... . D1 women

Nov 14, 2011 · This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive. Maximum Tractive Effort: 135,375 lbs. Built for the Union Pacific Railroad as one of twenty-five 4-8-8-4 ("Big Boy") steam locomotives ordered by the UP to haul heavy freight across the Continental Divide. Big Boys are famous as among the most powerful steam locomotives ever built. Weighs 1,200,000 pounds.Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ...N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ...Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ...4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ... Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display. May 8, 2023 · The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph! Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... The first United States 4-8-2s were in the employment of the C&O as the J-1 design, in 1911. Unlike the Hendrie 4-8-2s, this was basically an enlarged 4-6-2 for passenger trains over the Appalachians. The 4-8-2s used by the New York Central, the "Mohawks" were also an enlarged 4-6-2, essentially a K-11 type with an extra axle..

Popular Topics